SETEK | WATER INFRASTRUCTURE SOLUTIONS

Jinhaeng RSI
Longer life for your pipelines.

An electrochemical solution designed to support the conversion of existing corrosion deposits, limit new corrosion and enhance piping performance.

Illustration of the RSI Pipeline Protection Ionizer installed on a pipeline
Illustrative representation of the product and its intended effects.
20+ yearsManufacturer-stated device service life
5 yearsManufacturer-stated quality warranty
300,000+Total installations claimed by the manufacturer
2–3×Potential 2–3× pipeline-life improvement stated by the manufacturer
WHY RSI?

A comprehensive approach to
protecting existing infrastructure.

Addresses corrosion, deposits and operational performance in water systems where pipeline replacement and downtime are costly.

◈

Corrosion control

The zinc-based electrochemical mechanism aims to limit corrosion in ferrous piping.

↺

Conversion of existing rust

According to the manufacturer, iron oxide (Fe₂O₃) is converted into a more stable magnetite (Fe₃O₄) form.

≋

Biofilm and scale management

Designed to reduce the adhesion of biofilm and hard deposits to pipe surfaces and support their gradual removal.

◉

Water quality

May help reduce turbidity, discoloration and odor associated with corrosion.

⌁

Operating economics

Potential reduction in maintenance, cleaning and pipeline replacement requirements.

◇

No external power required

According to the manufacturer, the operating principle does not require continuous chemical dosing or an externally powered control unit.

* Service-life figures are manufacturer claims; actual performance depends on water chemistry, materials, flow rate, operating conditions and installation design.

OPERATING PRINCIPLE

Electrochemical protection.
Controlled surface conversion.

According to Jinhaeng RSI's manufacturer, the technology uses electrochemical processes involving zinc ions in water.

  1. Sacrificial zinc anode:Preferential oxidation of zinc relative to iron is intended to protect steel surfaces.
  2. Magnetite formation:Existing Fe₂O₃ rust is intended to convert into a more stable Fe₃O₄ structure.
  3. Biofilm and deposits:Ionic interactions may reduce the adhesion and persistence of surface deposits.
  4. Microbial action:The manufacturer describes a mechanism involving H₂O₂ formation; outcomes require verification under actual use conditions.
Zn → Zn²⁺Zinc ionizationInitiates the protective electrochemical process
Fe₂O₃Existing iron oxideCorrosion layer on inner pipe surfaces
Fe₃O₄Magnetite layerTarget formation of a more stable oxide structure
H₂O₂Manufacturer-described reactionProposed mechanism of microbial action
APPLICATIONS

For water-based critical infrastructure.

The manufacturer positions RSI technology for various pipe materials and water-system types. Project-specific hydraulic and chemical compatibility must be checked.

▣
Data centers

Preliminary engineering assessment for cooling-water infrastructure, auxiliary circuits and heat-transfer systems.

⌂
Industrial facilities

Process water, boilers, pumps, cooling towers and utility piping.

▤
Public buildings

Hospitals, educational facilities, government buildings and large campuses.

▥
Commercial buildings

Hotels, shopping centers, offices and mechanical plant rooms.

◫
Residential complexes

Multi-building developments and centralized water distribution systems.

≋
Water distribution networks

Raw-water, transmission, distribution and service-water pipelines.

Data center note: Suitability of RSI for closed-loop D2C GPU liquid-cooling circuits, CDUs, rack manifolds or OEM-approved specialty coolants is not established by this page. Water chemistry, galvanic compatibility, filtration and equipment warranties require project-specific review.
PERFORMANCE & VERIFICATION

Before and after, supported by measurable evidence.

The manufacturer describes monitoring of product effects using on-site inspection fittings and laboratory analysis.

Corroded pipe — before
Illustrative corroded pipe section

Rust, biofilm and deposits may accumulate within pipe sections, affecting water quality and hydraulic performance.

Illustrative image — not an actual test or field photograph.
Target condition — after
Illustrative clean pipe section

Existing rust is intended to convert into a more stable oxide layer, while deposits gradually decrease.

Illustrative image — not an actual test or field photograph.
Inspection at 3 / 6 / 9 months

Periodic observation of inner-pipe changes through an inspection or sample port.

SEM / XRD

Study of surface morphology and magnetite formation using materials analysis.

Laboratory testing

The manufacturer reports a 99.9% reduction in Serratia marcescens after 24 hours in a specified test.

The 99.9% figure refers to manufacturer-reported laboratory conditions for the specified organism; it is not a universal disinfection guarantee for all pathogens or operating conditions.

TECHNICAL ASSESSMENT

What to know before your project.

SETEK evaluates equipment selection based on actual system conditions. This section supports engineering review, rather than serving only as a sales presentation.

ParameterManufacturer information / assessment
Product categoryPiping performance enhancement device (Jinhaeng RSI)
Operating principleZinc ionization / sacrificial anode; corrosion and surface-deposit management
Device service lifeOver 20 years — manufacturer claim
Quality warranty5 years — manufacturer claim; geographic and commercial scope to be confirmed
Pipeline-life improvement2–3 times; up to 100 years under certain conditions — manufacturer claim, not a project warranty
ApplicationsWater utilities, buildings, residential, industrial water and mechanical piping
Custom manufacturingManufacturer describes made-to-order sizes of 300A and above
Design inputsPipe diameter and material, flow, pressure, water analysis, temperature, application and equipment compatibility
CertificationsManufacturer claims Korean green-technology, new environmental technology and public procurement recognitions; applicable documentation must be verified for each project
Technical claims are explicitly attributed to the manufacturer. Compliance with Turkish regulations, drinking-water contact approvals, pressure drop, connection standards, diameters and technical drawings must be checked against current manufacturer documents before quotation.
SETEK | TECHNICAL PROJECT REVIEW

Let's evaluate the right solution for your pipeline.

Share the diameter, material, flow rate and water analysis of your existing system to request a preliminary assessment.

Contact SETEK